Chevrolet Cruze Forums banner
1 - 1 of 1 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter · #1 · (Edited)
Hi all,

Just changed the timing belt on my wifes 2010 cruze 2.0 diesel.
One problem I ran into was the belt never lined up with the fuel pump? When I took the old belt off I noticed the marks didn't line up. Thought that maybe the belt had stretched and moved on..
Put the new belt on and still the marks don't line up.
Changing the pump one belt tooth just made the line marks on the opposite side.

Car is back together and seems to drive fine. My only concern is that when I took the original belt off I didn't pay attention to what side the marks where out..

Cam and crank where locked into position during change with the appropriate tools.

Is this normal or is something out of whack in the car?

Thanks!!

https://goo.gl/photos/iuiMt9s3SYHaBRBQ8
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top