Chevrolet Cruze Forums banner

TPMS relearn tool for Gen 2 Cruze part number?

14300 Views 10 Replies 9 Participants Last post by  Osgoood1
Hey all,

Does anyone know the GM part number or a 3rd party tool model that will work with the TPMS sensors of the Gen 2 Cruze?

TIA!
1 - 11 of 11 Posts
Hey all,

Does anyone know the GM part number or a 3rd party tool model that will work with the TPMS sensors of the Gen 2 Cruze?

TIA!
Orange Electronics Co. (OEC) pn# EL-50448 TPMS relearn tool. This is not a GM part but is what you'll find in just about every mechanics tool box for GM cars.

Rob
Thanks Robby! Just ordered one from Amazon.ca
Which one did you order and did it work okay with the Gen 2?
I thought it should be the same with Gen1, I use mine for Saturn and Malibu too and it works ok. I'll be surprised to see that GM changed the frequencies so drastic..
I just checked, I use the EL-50448 mentioned above so it must be the same then.
I thought it should be the same with Gen1, I use mine for Saturn and Malibu too and it works ok. I'll be surprised to see that GM changed the frequencies so drastic..
I just checked, I use the EL-50448 mentioned above so it must be the same then.
It should work the same - it works on my 2017 Volt as well as our 2014 Cruze.
The EL-50448 does in fact work as I have used it on my 2017 Cruze hatchback to reset tire positions and it works fine.
  • Like
Reactions: 1
Will it work for the TPMS sensors that I get with my Tirerack snow tire wheel & tire package?
Will it work for the TPMS sensors that I get with my Tirerack snow tire wheel & tire package?
Yes it will.
Hey all,

Does anyone know the GM part number or a 3rd party tool model that will work with the TPMS sensors of the Gen 2 Cruze?

TIA!
I just got rims of CarID and the new TPMS didn't marry to the tires. I called American tires and they said bring it down and they do it for free. Took 2 seconds
1 - 11 of 11 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top