[rlw_1224]

So I just rotated the tires for the first time on my '12 LT. Once I was done i put the car in relearn mode and slowly let air out of the driver side front tire. Never heard the horn beep. The pressure got down to 20 psi! I over inflated the tire back to 41 and started the process again.... still no horn beep! I literally tried 5 times then said piss on it. Anyone else absolutely not been able to get this to work by slowly letting air out?

 

[rlw_1224]

just put new wheels on car yesterday with new sensors, Put the system in relearn mode horn honked 2 times,Had the tires at 40 psi.Started on the driver front started letting air out, took to about 30 psi then horn would honk worked fine on my car

Is yours a '11 or '12?

 

[rlw_1224]

rlw_1224,
Here is the process step by step that you should follow. You are also able to find this information in your owner’s manual starting on page 10-54. If this still does not work, I would suggest that you contact your local dealership and have them look into this for you. If you have any further questions please feel free to contact me.

Stacy, Thanks for the reply, however that is what it says in the owner's manual (which I read). My problem is I'm trying to perform the procedure by adding/removing air from the tires (as many folks have stated that works) because I do not have a re-learn tool. Has this feature been disabled on the newer model Cruze's?