Chevrolet Cruze Forums banner
1 - 3 of 3 Posts

·
Registered
Joined
·
29 Posts
Discussion Starter · #1 ·
So another weird issue.

Whenever i shift gears, when releasing the clutch, i feel on the pedal and hear outside a "tap or click noise", kinda loud.
Only happens when on load, will not happen on neutral.
I would press the clutch pedal, shift, and when releasing the clutch, around midway, you feel a slap/tap/click on the pedal and you hear it outside also.

Has anyone experience anything similar????
 

·
Registered
Joined
·
29 Posts
Discussion Starter · #3 ·
Sounds like the dual-mass flywheel trying to match speed between both halves. It has some designed play to make the transition on/off power as smooth as possible.

If you notice knocking at idle or on decel, the weight has locked up.

Hmm, so the Flywheel could be starting to fail?
I was leaning towards the flywheel as ive been reading alot of issues about them on other places, but wanted to see if there were any other factors
 

·
Registered
Joined
·
29 Posts
Discussion Starter · #5 ·
Maybe. Mine was progressively more noisy on clutch application or accel/decel as I passed 30k until it eventually began to lock up entirely.

Wow, that sounded bad. But mines is not like that, you only hear it or feel it on the pedal when your releasing the clutch, but could be the same thing.
Did you went with a single lightweight flywheel or went with another dual mass?
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top