Chevrolet Cruze Forums banner
1 - 3 of 28 Posts

· Registered
Joined
·
185 Posts
Discussion Starter · #1 ·
Hello all I figured at 50000 I would run sea foam through the brake booster line connected to the intake and 1 whole can in the tank. Well what a difference lots of stuff out of exhaust even blue smoke towards end of oil grime burning off no hesitation and way better response. I've used it in all my cars from time to time always had great results. Thought I would see if anyone else did this yet. Also read can thoroughly before doing this through vac hose also if so do this process at your own risk.
 

· Registered
Joined
·
185 Posts
Discussion Starter · #4 ·
Yes has to be run through brake booster vac line my 1.4 splits the line after it comes out so I disconnected the one piece that connects to the intake and dripped it in through there. Also through some in the turbo vac line to was some oily residue in there. Didn't think to video it good idea sorry.
 

· Registered
Joined
·
185 Posts
Discussion Starter · #11 ·
I also used it in many cars never fouled out any plugs key is to drip it in slow do not put a hose into can and let it suck it up full flow you will do damage let it stream in at a slow rate I did 1/2 can in let it sit 15 min. Other half in tank.
 
1 - 3 of 28 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top