Chevrolet Cruze Forums banner

Verano doughnut spare for CTD

49502 Views 68 Replies 24 Participants Last post by  Boathook36
Will this fit the CTD 5 x 115 bolt pattern, 4 x 16 dia. Offset????
1 - 5 of 5 Posts

· COTM Winner
2014 Cruze Diesel, 2007 Cobalt, 1981 Camaro Z28, 2017 Volt
Joined
·
7,129 Posts
Great to know! This should be stickied...
 

· COTM Winner
2014 Cruze Diesel, 2007 Cobalt, 1981 Camaro Z28, 2017 Volt
Joined
·
7,129 Posts
Curious but is the DEF tank next to the fuel tank on the Gen2s? I know the fill port is next to the fuel fill. Do we actually get a real spare?


Yup! (Someone here took this at NAIAS this year).

DEF fill is in the fuel housing.
 

· COTM Winner
2014 Cruze Diesel, 2007 Cobalt, 1981 Camaro Z28, 2017 Volt
Joined
·
7,129 Posts
Our tires are 17 inch. You don't want to run a 16 inch on the front. You should move the spare 16 inch to the back.
What? The Verano spare fits up front...they use the same brakes as the CTD.
 

· COTM Winner
2014 Cruze Diesel, 2007 Cobalt, 1981 Camaro Z28, 2017 Volt
Joined
·
7,129 Posts
It's a spare - who cares? It's only made for temporary trips - spares these days are almost ALWAYS far smaller than the regular wheel/tire.
 

· COTM Winner
2014 Cruze Diesel, 2007 Cobalt, 1981 Camaro Z28, 2017 Volt
Joined
·
7,129 Posts
I was fortunate when I bought my CTD in 2012 in Australia as it came with a 16x6.5 steel wheel as a spare and it match the diameter of the 17x7 alloy road wheels.
So it has a full size instead of the donuts most cars have now (if they have one)?
 
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top