Chevrolet Cruze Forums banner
1 - 13 of 13 Posts

·
Registered
Joined
·
79 Posts
Discussion Starter · #1 ·
So I’ve got about 103000 miles now on my 14 TD and both the driver and passenger visor mirror covers have broken off. Both times it was the right side plastic that surrounds the pin. Looks like it just crumbled. Anyone else with this issue?
 

·
Administrator
2014 LT program car, Pull Me Over Red, 1.4T Auto
Joined
·
12,421 Posts
I would go to a pick n pull type yard. I paid $5 for a visor with HomeLink in it, can't imagine you'll pay much more for a Cruze visor. If I remember it is two or three torx screws to remove/replace.
 

·
Registered
Joined
·
280 Posts
Most all of the first gens do this. Both of them on my daughter's 13' LTZ/RS broke also. No big deal. Just did not replace them. Crazy that they want about $60 or so for those. Have not missed them at all.
 

·
Registered
Joined
·
20 Posts
Bought mine at a u-pull-it. BTW, its kinda a pain to unhook the wire for the light, the wire is glued to the headliner, had to pull it off, which is a challenge with minimal dissassembly of the interior.
 

·
Registered
Joined
·
25 Posts
So I’ve got about 103000 miles now on my 14 TD and both the driver and passenger visor mirror covers have broken off. Both times it was the right side plastic that surrounds the pin. Looks like it just crumbled. Anyone else with this issue?
That happened to mine, maybe two years ago. Haven't missed it either.
 

·
Registered
Joined
·
533 Posts
Both of mine are gone. Don't care.
 

·
Premium Member
Joined
·
3,177 Posts
Yup! Unfortunately my driver side visor mirror did this in my 2015 LTZ RS at about 60,000 miles. I haven't yet replaced it but I guess I will before selling the car off in the future. I guess it'll be something worth fixing before selling/trading it in?
 

·
Registered
Joined
·
1 Posts
So I’ve got about 103000 miles now on my 14 TD and both the driver and passenger visor mirror covers have broken off. Both times it was the right side plastic that surrounds the pin. Looks like it just crumbled. Anyone else with this issue?
I glued a couple 3/32 metal roll pins from the hardware store to the cover and fixed it for $1 . Worked great
 
1 - 13 of 13 Posts
Top