Chevrolet Cruze Forums banner
Cancel

What did you do TO your Cruze today?

302202 Views 2278 Replies 328 Participants Last post by  Blasirl, 
2013LT
Post what you did to er and maybe even a picture to accompany it.

Today I just washed it and did a quick wax job. It was pretty dirty from about 5 commutes to work!
Reply
Save
Like
1901 - 1920 of 2279 Posts
Mr_Pat
What ground effect set is that on your Car @SlyCruze ?? I'm referring to the body color ones.
Reply
Save
Like
S
it's Called NEFD, it was front lip and side skirts. not sure if it's still available.
Reply
Save
Like
  • Like
Reactions: 1
Mr_Pat
No idea.. I'm just looking to do something to the front edge of my bumper. I picked up one of the splitters a while back but decided not a good idea due to the amount of snow i deal with and just didnt care for it when I had it in front of me
Reply
Save
Like
M
Did the led tails/brake, license plate, and reverse lights today
Reply
Save
Like
S
2
Put on the cruze culture coil pack cover, not really feeling it though. Went back to the painted oem

Sent from my SM-G955U1 using Tapatalk

Sorry for the big pics
See less See more
Reply
Save
Like
Thebigzeus
stormtrooper15 said:
Put on the cruze culture coil pack cover, not really feeling it though. Went back to the painted oem

Sent from my SM-G955U1 using Tapatalk

Sorry for the big pics
Click to expand...
I like it, it’s a bit of a cleaner look. But if ya don’t, I feel that. You have to see it often.
Reply
Save
Like
  • Like
Reactions: 1
S
Thebigzeus said:
I like it, it’s a bit of a cleaner look. But if ya don’t, I feel that. You have to see it often.
Click to expand...
I was going for the cleaner look, spot on man. If it wasn't a semi gloss black and was more of a matte black, matching the valve cover, I'd have left it on. Contemplating painting it white or a matte black, unsure yet and it'll require some taping off for the letters so I gotta be sure the first time around. Or obviously paint the valve cover but nahh

Sent from my SM-G955U1 using Tapatalk
Reply
Save
Like
Cruzing12
Took the power out of the power steering rack for a change up and to see how bad the damage is from my ditch jump a while back.

I like the feeling of there being no assist at speed, and not having to fight center with how twitchy the rack is making you look like a drunk going down the road,but would like the assist at slow speeds. Right now the later is the minimal so I may leave the power off.

Lol the ultimate anti theft devices strong arm steering and stick...
Reply
Save
Like
KirkM71
3
Spent the day Cutting and waxing her, 3 coats in total.
Oh and blacked out Badges too (y)


292490
292491
292492
See less See more
Reply
Save
Like
  • Like
Reactions: 3
M
Thanks to @Mr_Pat for swinging by, we put a K&N on and it’s nice to hear the spool and bypass. Set up an appointment with the local dealership to figure out what they did to program the fogs
Reply
Save
Like
  • Like
Reactions: 2
Cruzing12
292540
heat gun and some arm strength. This is going to work.
See less See more
Reply
Save
Like
Mr_Pat
To do what ????????????
Reply
Save
Like
Cruzing12
Mr_Pat said:
To do what ????????????
Click to expand...
To "drift".

The pipe goes over the rear wheels. Making the rear end real lose. "PVC drift" on YouTube will explain everything.
Reply
Save
Like
Thebigzeus
Cruzing12 said:
To "drift".

The pipe goes over the rear wheels. Making the rear end real lose. "PVC drift" on YouTube will explain everything.
Click to expand...
:LOL:
Reply
Save
Like
  • Like
Reactions: 2
JLL
Cruzing12 said:
To "drift".

The pipe goes over the rear wheels. Making the rear end real lose. "PVC drift" on YouTube will explain everything.
Click to expand...
Kids, please don't try this at home!

🚗🌲🔥💥☠
Reply
Save
Like
  • Like
Reactions: 1
Mr_Pat
LMAO in all fairness I used this method for my kids powerwheels a few years back.. I just wouldnt have expected someone to put this on an actual car.... I had upgraded one to 24 volt system with a 800 watt motor and full go kart hubs rims and tires. I put PVC tube over the back tires and then reinflated the tires until the tire gripped the tube and had some brackets inside with bolts counter sunk into the outer pvc to the tires didn't slide out of the pvc
Reply
Save
Like
  • Like
Reactions: 1
Cruzing12
JLL said:
Kids, please don't try this at home!

🚗🌲🔥💥☠
Click to expand...
I'm one of those crazy people that go out in a snow storm or while its freezing rain just to slide around.
Reply
Save
Like
Adam Hamel
Just did my first oil change a few days ago. I know most of y'all could do an oil change in your sleep, but it's kind of a big deal for me. I used a whole bag of oil dry for all the oil I spilled, plus a lot of shop towels. I initially overfilled it and had to drain some out, but I drained to much and had to buy more. Oh well. The more you know.
293118
See less See more
Reply
Save
Like
JLL
Adam Hamel said:
Just did my first oil change a few days ago. I know most of y'all could do an oil change in your sleep, but it's kind of a big deal for me. I used a whole bag of oil dry for all the oil I spilled, plus a lot of shop towels. I initially overfilled it and had to drain some out, but I drained to much and had to buy more. Oh well. The more you know. View attachment 293118
Click to expand...
Congratulations!

Your learning. Is this the first oil change you've EVER done?
Reply
Save
Like
Adam Hamel
JLL said:
Congratulations!

Your learning. Is this the first oil change you've EVER done?
Click to expand...
Yep. Second oil change on the car, I took it in for the first one.
Reply
Save
Like
  • Like
Reactions: 1
1901 - 1920 of 2279 Posts
Chevrolet Cruze Forums
CruzeTalk.com forum, news, discussions and the best community for owners to discuss all things related to the Chevy Cruze.
Full Forum Listing
Explore Our Forums
General Discussion Gen1 1.4L Turbo Gen1 Service Issues 👋 CruzeTalk New Member Introductions Gen1 Appearance, Body, Detailing, & Interior
Top