I was wondering the same , hate GM took them away on the 2019 Cruze refresh.

 

Yeah same, was only wondering because I saw another gen2 driving around and it had those mirrors that actually looked clean and nice.

 

It varies from car to car if they are plug and play, but they do not require any extra BCM programming, they run off they are powered off same circuit as the front turn signals.
Worst case scenario you need to add wiring from the door harness connector to the front turn signal feeds at the body control module.

 

It varies from car to car if they are plug and play, but they do not require any extra BCM programming, they run off they are powered off same circuit as the front turn signals.
Worst case scenario you need to add wiring from the door harness connector to the front turn signal feeds at the body control module.

It varies from car to car if they are plug and play, but they do not require any extra BCM programming, they run off they are powered off same circuit as the front turn signals.
Worst case scenario you need to add wiring from the door harness connector to the front turn signal feeds at the body control module.

I figured as much, I read about how the fog lights on gen2’s needed to be programmed so I just wired mine up with the switch located under the trunk release button on the door since the switch included in the kit is aftermarket and wasn’t the oem style setup that control headlights also as seen on OEM equipped cruzes with the fog and headlights control panel. I’ll see if I order the mirrors to try out, who knows hopefully they’re plug and play, if not like you said I don’t mind running the wiring to them. Thanks for the help!

 

These are for the Gen I, but they may give some insight on the process.

How-To: Upgrade To Power Folding Mirror - Cruze LT - Brasil
How-To: Add Heated Mirrors

 

Interesting, appreciate the info, thanks!

 

I’ll probably take a crack at it too. The thing is I have blind spot monitors and heated mirrors, and I don’t know if those two are separate packages or if they come directly with each other on previous model years. So I’d have to find a mirror with the turn signal, blind spot monitoring, and heated.

 

SIDE MIRROR for 2016-2019 CHEVROLET CRUZE BSM Power Heated w/Blinker Passenger R | eBay

With Blind Spot Monitoring (BSM): Features a BSM system that lights up a warning indicator when a vehicle is in your blind spot. View the Driver Side Mirror with BSM & Signal. View Passenger Side Mirror with BSM.

www.ebay.com

 

Maybe these will work for you:

Car Side Mirror Automatic Fold Unfold Kit ACC Overload Protection Anti-scratch | eBay

Turning ACC ON will unfold the side mirror automatically. The system can unfold the side mirror automatically when ACC off and the door unlocked. The system can fold the side mirror automatically when ACC off and closing the door.

www.ebay.com

Universal Auto Fold /Unfold Rear View Mirror Folding Closer System Modules N1X3 | eBay

The system can unfold the side mirror automatically when opening the door before igniting the car. Turning ACC ON will unfold the side mirror automatically. 1 Auto side mirror folding system. The system can fold the side mirror automatically when ACC off and closing the door.

www.ebay.com

 

UPDATE
What’s up CT team? So got around to finally trying to swap my base mirrors on my LT to ones with built in turn signal.. however they are NOT plug and play connector on new mirror has 2 extra pins/wires for a total of 7 pins while the harness on my car only has 5 wires/pins.. Motor works when new on is connected but turn signals obviously don’t. I undid a bit of the loom to see if there are any extra wires but no luck, looks like it’ll take some more work to get the signals to work. I guess higher trims already have the necessary connections. Hopefully all that makes sense and photos too. For now I’ll stick with my regular mirrors and wait for warmer weather to probably just run some wiring from the headlight to the mirror.
So if you havea 2016.5 LT swapping mirror with turn signals will not work sadly without some extra work.

 

Pretty sure I mentioned that as a likely scenario. Hope you're not too sad and you get em wired up.

 

UPDATE
What’s up CT team? So got around to finally trying to swap my base mirrors on my LT to ones with built in turn signal.. however they are NOT plug and play connector on new mirror has 2 extra pins/wires for a total of 7 pins while the harness on my car only has 5 wires/pins.. Motor works when new on is connected but turn signals obviously don’t. I undid a bit of the loom to see if there are any extra wires but no luck, looks like it’ll take some more work to get the signals to work. I guess higher trims already have the necessary connections. Hopefully all that makes sense and photos too. For now I’ll stick with my regular mirrors and wait for warmer weather to probably just run some wiring from the headlight to the mirror.
So if you havea 2016.5 LT swapping mirror with turn signals will not work sadly without some extra work. View attachment 291095 View attachment 291096 View attachment 291097


hahaha I remember you did and believe me I went in with low expectations but with a small bit of hope it’d be as simple as plug and play and call it a day! I mean it’s not a total loss of $200 yet, I already ran wiring for my aftermarket fog lights through the fender and into the door where i placed the switch right under the trunk release button so will just loom it all up the next time it’s warm out because the new mirrors do look sleek and added safety of switching lanes is cool too haha. Plan B was just cutting some holes in the fenders and use some beamer or honda side markers but don’t think it’d look as clean as the mirrors.

One thing that does bother me most is putting the **** door panel back on 😂gm did not make it easy to do in a few minutes.

i will update you when I get around to wiring them up in the coming weeks/spring break. Appreciate the help and tips Mav!