Chevrolet Cruze Forums banner

Stabilitrack and ABS lights on, service bulletin

1 reading
113K views 31 replies 14 participants last post by  Blasirl  
This is an old problem. It was written up in Techlink back in late '11 or early '12. The speed sensors on each wheel are composed of a ring of magnets in each hub and the sensor reads the magnetic pulses to determine wheel speed. If dirt gets on the ring, the pulses can be misread. The dealers should be able to fix it as it is well documented for them.
 
Did you try pulling the battery cables off for 30 seconds or so to see if that reset things? Oh, yeah, did you reset the stored codes also?